The reducer is familiar to everyone. There are many types of reducers and their functions are different. When we buy a reducer, the first thing is how to install it? What are the essentials for its installation? Let's take a look at the experts from Guomao Reducer Group Co., Ltd.

1. The fixing of the reducer is very important. To ensure smooth and firm, we should install the reducer on a horizontal foundation or base. At the same time, the oil in the oil drain should be removed and the cooling air circulation should be smooth. If the fixing of the reducer is not good and the foundation is unreliable, it will cause phenomena such as vibration and vibration, and the bearings and gears will be unnecessarily damaged.

2. There are many types of couplings used in the reducer, but it is better not to use steel fixed couplings. The installation of such couplings is difficult. If the installation is improper, the load will be increased. It is easy to cause damage to the bearing and even cause the output shaft to break.

3, the installation position of the reducer should ensure the operation of the staff, the boundary mark mold includes convenient access to the cursor, vent plug and drain plug. After the installation of the reducer is completed, the inspectors should thoroughly check the accuracy of the installation position in order, and determine the reliability of each fastener.

4. Before the speed reducer is running, it is necessary to prepare for operation. Remove the vent hole plug of the oil pool and replace it with a vent plug. Open the oil level plug screw to check the oil line height. Add the lubricating oil over the oil level plug to the hole. After overflowing and then screwing on the oil level plug and making sure it is correct, you can start the test run.

5. The transmission coupling of the reducer should be equipped with protective devices when necessary. For example, there are protrusions on the coupling parts or gears, sprocket transmission, etc. If the radial load of the output bearing is large, the reinforcement type should also be selected.

The above simple introduction, is there any answer you want? I hope that the introduction of Xiaobian can help everyone, more knowledge we will analyze for you in the future.